How To Fix RCM Loader Not Connecting To PC Error

Using a faulty RCM (Recovery Mode) loader or such RCM that’s not connecting to your PC can be as annoying as losing out on a game night.

Every gamer knows that a successful connection of the RCM software would allow them to load some customized firmware and payloads onto their Nintendo Switch using a compatible USB cable.

For advanced users, running some unsupported homebrew game apps on the console is also possible but requires a very high level of technicality.

However, this article focuses on the legal approaches to using the RCM loader and how to fix the issues with your PC.

Why Is My RCM Loader Not Connecting To the PC

There are several reasons why your RCM loader may not be connecting to your PC at the moment… continue reading to find out what issue your RCM Loader software might be having and how to fix it

Incompatible USB Cable: It is crucial to ensure you’re using a compatible USB cable with your Nintendo Switch.

Wrong Mode: Endeavor to put your Switch in RCM mode. If not, the software on your system will not recognize the Switch.

READ: How To Disable Ctrl Shift QQ (Full Guide)

Driver issues: it is necessary to install or update the drivers of the Switch on your computer system.

Outdated software: It can never be overemphasized that outdated software malfunctions. So endeavor to update your RCM loader software tool.

Antivirus: The Firewall software is known for protecting a program, it may also block the connection between your computer system and the Switch. You’re meant to disable the RCM software on your antivirus.

USB Port: Some USB Ports may malfunction and may refuse to connect the switch to the PC. Try to use a good USB Port.

Hardware Issues: Most times, the hardware of the Switch may not function as expected…this can cause a disconnection.

After checking out all these possible issues surrounding your RCM Loader connection, it is in your best interest to troubleshoot each of them for a possible resolution. If the connection issues persist, reach out to the developers of your RCM loader software tool for a lasting solution.

How To Start RCM Loader Software

In order to start off with using the RCM loader on a system, you will have to put the following factors into consideration.

A Nintendo Switch console in RCM mode. To achieve RCM mode, you’ll need to press and hold the Volume and Power buttons while the console is turned off.

A USB cord that is highly compatible with the Switch. You’ll need this to connect the console to your PC.

A payload software tool to send payloads to the Switch. You may choose between Hekate, ReiNX Toolkit and TegraRcmGUI

If you have all of the above handy, then it’s very certain that you can begin the process of loading customized firmware onto your Switch. Below is some practical approaches you should take:

READ: The Best Ways To Fix S.Mzstatic.com iTunes Error

  • Link your Switch to your computer system with the compatible USB cable.
  • Launch the RCM loader software tool on your computer system.
  • Then, choose the payload you wish to send to the Switch. This can be between your customized firmware or a homebrew App.
  • Now you’ll have to Click the “Send” button on the tool to send your desired payload to the Switch.
  • The Switch will undergo an auto rebooting, hence your custom file will be loaded upon restart.

How Do I Update My RCM Loader Software

There may not be a basic approach to updating an RCM loader, since every software has its step. However, let’s get into a supposed general step to update an RCM loader software tool:

  • Visit the developer’s website/social media handle for latest updates
  • Head on to Download the newest version of the software. The download must be from a reliable source.
  • Quit the old version of the software you have open on your computer system.
  • Install the newest version of RCM Loader.
  • If the package installation was successful, then you can now launch the newest version of the RCM Loader you just installed.

On the other hand, some RCM Loader software might have been left updated by the developers, so you should check for updates before uninstalling the version on your PC.

How Do I Know If I Am On RCM Mode

There are just a number of ways to ensure your Nintendo Switch is in RCM (Recovery Mode) mode.

One of the most famous ways is to look out for the dialogue messages “RCM” or “Recovery Mode” on the screen immediately after it is switched on. The message is a clear indication that the Switch has entered the RCM mode.

Another way to check is to connect your Switch to your PC using a USB cable. If the Switch is in RCM mode, it will be detected as an unknown device by your PC.

You can employ a software tool likeTegraRcmGUI which can check the Switch’s connection status once you connect the Switch to your computer system and launch TegraRcmGUI.

READ: Can You See Who Viewed Your Facebook Video?

For those using a jig, it can also help you to check if your switch is in RCM mode. As soon as the jig is placed into the right joy con rail while the switch is turned off, it will show the RMC mode on the display screen.

It is highly recommended to note that if your Switch is not placed in RCM mode, it won’t be possible for you to inject some payloads onto your switch with the RCM Loader.

How To Use RCM Loader To Inject Payload Switch

Injecting a payload with your RCM loader software onto your Nintendo Switch console takes the following process.

A Nintendo Switch console in RCM mode. To achieve RCM mode, you’ll need to press and hold the Volume and Power buttons while the console is turned off.

A USB cord that is highly compatible with the Switch. You’ll need this to connect the console to your PC.

A payload software tool to send payloads to the Switch. You may choose between Hekate, TegraRcmGUI, and ReiNX Toolkit. After checking and ensuring all of the above is set, you may start with the procedure of injecting the payload onto your Switch.

Follow the steps below to get it done

  • Connect the Switch to your computer system with a compatible USB cable.
  • Load the RCM software tool on your PC.
  • Select the payload you wish to send to the Switch. This can be between your customized firmware or a homebrew App.
  • Now you’ll have to Click the “Send” button on the tool to send your desired payload to the Switch.
  • Observe the software to ensure the payload was successfully injected.
  • Lastly, you’ll need to disconnect the Switch from your computer system and turn it on.

The payload should have been loaded on the Switch if the procedure was closely implemented.

Final Thoughts

Having a hard time connecting RCM Loader Software to your computer system isn’t the very end of your gaming experience.

There are several approaches to fixing the issue and one of the most famous ways is to thoroughly identify the reason why your RCM Loader Software is not connecting to your PC.

If you’re able to achieve this fit, then troubleshoot the underlying issues and check if the issues are resolved.

Worse yet? Not to worry; You can reach out to the developers of your RCM loader through their website or social media handle. They’ll definitely have a lasting solution to why your RCM loader is not connecting to your PC.

Leave a Reply

Your email address will not be published. Required fields are marked *